Verifying BGP Conditional Route Injection



To verify that the BGP Conditional Route Injection feature is configured correctly, use the show ip bgp or show ip bgp injected-paths command.

The following sample output is similar to the output that will be displayed when the show ip bgp
command is entered:

Router# show ip bgp 172.16.0.0
BGP routing table entry for 172.16.0.0/8, version 13
Paths:(2 available, best #1, table Default-IP-Routing-Table)
Flag:0x200
Not advertised to any peer
Local, (injected path from 172.16.0.0/8)
10.0.0.2 from 10.0.0.2 (2.2.2.2)
Origin incomplete, localpref 100, valid, external, best
Community:957874231
200
10.0.0.2 from 10.0.0.2 (2.2.2.2)
Origin incomplete, metric 0, localpref 100, valid, external

The following sample output is similar to the output that will be displayed when the show ip bgp
injected-routes command is entered:

Router# show ip bgp injected-paths
BGP table version is 11, local router ID is 10.0.0.1
Status codes:s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes:i - IGP, e - EGP, ? - incomplete



NetworkNext HopMetricLocPrfWeightPath
*>172.16.0.010.0.0.2

0?
*>172.17.0.0/1610.0.0.2

0?